D1 Harvey, IL Fence and Security Gate Installation REBID
Federal opportunity from FINADMIN494 - Finance & Administration • DOT - Transportation. Place of performance: IL. Response deadline: Sep 06, 2024.
Market snapshot
Baseline awarded-market signal across all contracting (sample of 400 recent awards; refreshed periodically).
Related hubs & trends
Navigate the lattice: hubs for browsing, trends for pricing signals.
Point of Contact
Agency & Office
Description
D1 Harvey, IL Fence and Security Gate Installation REBID
District 1 fence repair, installation, and electric security gate installation in Harvey, IL. No subcontracting. The Bid opening has been extended. All bids must be submitted in BidBuy by 9/6/24 at 10:00 am.
Item # 1: ( 988 - 15 ) Remove & replace approximately 250 ft of 6 ft high galvanized chain link fence. Barb wire shall be attached with a minimum additional height of 1 ft. The chain link fence shall be 9 gauge. Terminal posts shall be at least 2.5" in diameter and lineal posts shall be at least 2". Posts shall be round and set into ground with cement to industry standards. Existing fence and gate shall be removed and disposed by the contractor.
Remove & replace approximately 250 ft of 6 ft high galvanized chain link fence. Barb wire shall be attached with a minimum additional height of 1 ft. The chain link fence shall be 9 gauge. Terminal posts shall be at least 2.5" in diameter and lineal posts shall be at least 2". Posts shall be round and set into ground with cement to industry standards. Existing fence and gate shall be removed and disposed by the contractor.
Item # 2: ( 988 - 15 ) Install 3 Concrete filled round bollards. Bollards shall be a minimum of 5" in diameter and 4 ft in height. They are to be set 3 ft into the ground and secured with cement. Each bollard is to be provided with yellow exterior cover.
Install 3 Concrete filled round bollards. Bollards shall be a minimum of 5" in diameter and 4 ft in height. They are to be set 3 ft into the ground and secured with cement. Each bollard is to be provided with yellow exterior cover.
Item # 3: ( 988 - 15 ) Install a pedestrian entrance gate. The opening is to be 3 ft in width by 6 ft in height. Gate is to include an industrial (heavy duty and weather proof) self closing device.
Install a pedestrian entrance gate. The opening is to be 3 ft in width by 6 ft in height. Gate is to include an industrial (heavy duty and weather proof) self closing device.
Item # 4: ( 988 - 15 ) Install an enclosed aluminum track cantilever sliding gate. The gate shall be 25 ft wide by 6 ft high and include 3 stranded barb wire. The chain link panels shall be 9 gauge. Gate posts shall be at least 4" in diameter and 6 ft in height. Posts are to be set at least 4 ft in the ground and secured with cement.
Install an enclosed aluminum track cantilever sliding gate. The gate shall be 25 ft wide by 6 ft high and include 3 stranded barb wire. The chain link panels shall be 9 gauge. Gate posts shall be at least 4" in diameter and 6 ft in height. Posts are to be set at least 4 ft in the ground and secured with cement.
Item # 5: ( 988 - 15 ) Install a Heavy Duty Gate Operator such as the SL24 Lift Master or equivalent. Include 3 gate safety sensors (photo eye and resistive edge). Provide at least 15 remote controllers. Keypad Access shall be provided. Intercom System shall be provided. At least 3 receiving monitors shall be provided. The unit shall have a timer and exit loop. Unit shall include at least a 5 year manufactory warranty. Electrical lines must be trenched through the asphalt from the existing electrical location to the gate and intercom. Vendor must have minimum of 2 years company experience with security fence install. No subcontracting. To be responsive, vendor must be able to bid and provide all items requested.
Install a Heavy Duty Gate Operator such as the SL24 Lift Master or equivalent. Include 3 gate safety sensors (photo eye and resistive edge). Provide at least 15 remote controllers. Keypad Access shall be provided. Intercom System shall be provided. At least 3 receiving monitors shall be provided. The unit shall have a timer and exit loop. Unit shall include at least a 5 year manufactory warranty. Electrical lines must be trenched through the asphalt from the existing electrical location to the gate and intercom.
Vendor must have minimum of 2 years company experience with security fence install. No subcontracting.
To be responsive, vendor must be able to bid and provide all items requested.
Files
Files size/type shown when available.
BidPulsar Analysis
A practical, capture-style breakdown of fit, requirements, risks, and next steps.
FAQ
How do I use the Market Snapshot?
It summarizes awarded-contract behavior for the opportunity’s NAICS and sector, including a recent pricing band (P10–P90), momentum, and composition. Use it as context, not a guarantee.
Is the data live?
The signal updates as new awarded notices enter the system. Always validate the official award and solicitation details on SAM.gov.
What do P10 and P90 mean?
P10 is the 10th percentile award size and P90 is the 90th percentile. Together they describe the typical spread of award values.