TDF - PIF Mixing Valves SP

TDF - PIF Mixing Valves SP The Treatment and Detention Facility (TDF) intends to purchase 7 electronic mixing valves to replace the current tempered water mixing valves throughout the facility located at 17019 County Farm Rd, Rushville, IL 62681. Item # 1: ( 815 - 75 ) Digital temperature control stations. 2" inlet connections (copper tube). 2" outlet connection (copper tube). 1-1/4" return connections (copper tube). Digitally Controlled Mixing Valve with simple two-line LED display. Factory check valves and full port ball valves on inlet piping. Outlet Test Connection with ball valve and 3/4" connection. Full port ball valve mounted downstream of test connection on mixed water outlet of the system. Subassembly with 1-1/4" return piping, circulator, full port ball valves and check valves. System mounted on galvanized struts. Struts shall be assembled with three-hole flat angle plate on corners, four-hole tee plates or two-hole flat plate connectors on all other support pieces using 3/8" grip lock nuts and 3/8" x 1" hex head cap screws, washers and lock washers. All electrical connections to be completed by installer. Return pump included and installed with the following features: 1) High-performance, variable speed, wet-rotor circulator with high-efficiency ECM permanent magnet technology, simple 3-button control. 2) An intuitive digital user interface lets you choose between a variety of operating modes; ActiveADAPT , five Constant Pressure curves, five Proportional Pressure curves, Min/Max fixed speed or speed control through 0-10V DC or PWM external input. 3) Digital LED screen displays; Watts, GPM, Head, RPM and diagnostic error codes. Maximum of 34 feet of head and 50 GPM. Valves must be ASSE 1017 Certified. Valves must be CSA Certified. Valve electronics must be UL Certified. Digital temperature control stations. 2" inlet connections (copper tube). 2" outlet connection (copper tube). 1-1/4" return connections (copper tube). Digitally Controlled Mixing Valve with simple two-line LED display. Factory check valves and full port ball valves on inlet piping. Outlet Test Connection with ball valve and 3/4" connection. Full port ball valve mounted downstream of test connection on mixed water outlet of the system. Subassembly with 1-1/4" return piping, circulator, full port ball valves and check valves. System mounted on galvanized struts. Struts shall be assembled with three-hole flat angle plate on corners, four-hole tee plates or two-hole flat plate connectors on all other support pieces using 3/8" grip lock nuts and 3/8" x 1" hex head cap screws, washers and lock washers. All electrical connections to be completed by installer. Return pump included and installed with the following features: 1) High-performance, variable speed, wet-rotor circulator with high-efficiency ECM permanent magnet technology, simple 3-button control. 2) An intuitive digital user interface lets you choose between a variety of operating modes; ActiveADAPT , five Constant Pressure curves, five Proportional Pressure curves, Min/Max fixed speed or speed control through 0-10V DC or PWM external input. 3) Digital LED screen displays; Watts, GPM, Head, RPM and diagnostic error codes. Maximum of 34 feet of head and 50 GPM. Valves must be ASSE 1017 Certified. Valves must be CSA Certified. Valve electronics must be UL Certified.